Removing Glass Rings & Dull Spots

PRODUCTS NEEDED: USE: USAGE:
Marbamist® or Clean EnCounters® Ready to Use Spray Cleaner Daily
International Stone Polish® Enriches the color of the stone Monthly
Marbacream® Glass Ring Remover As Needed

 

 

CLEANING: (Daily to Weekly)
Product: Marbamist® or Clean EnCounters
  1. Simply spray Marbamist or Clean EnCounters on to the stone surface.
  2. Wipe off the cleaner with a clean and dry terry cloth or paper towel.
**For Bathrooms, use Counterrific™ Disinfectant instead of Marbamist or Clean EnCounters.

REMOVING GLASS RINGS & DULL SPOTS: (As Needed)
Product: Marbacream®
  1. Clean the surface with Marbamist or Clean EnCounters.
  2. Shake the Marbacream bottle until the product thickens.
  3. Add a few drops of water to the damaged area.
  4. Apply a dab of Marbacream to the damaged area.
  5. With a clean and damp red buffing pad or white terry cloth towel, begin buffing in a circular motion for 30 seconds. (Be sure to apply pressure when polishing.)
    **Repeat steps 2-5 if the polish is not achieved.
    ***If the surface is rough to the touch, Honex must be used before the Marbacream.
  6. Rinse with either Marbamist or Clean EnCounters and wipe it dry.
  7. Apply one coat of International Stone Polish to complete the process.
    (Do not apply the International Stone Polish to floor surfaces.)

POLISHING & ENRICHING COLOR: (Monthly)
Product: International Stone Polish®
  1. Shake the bottle before using and apply the polish to the stone surface with a clean, dry and white terry cloth towel.
  2. Let the polish dry to a haze for 2 minutes.
  3. Wipe off the haze with a clean, dry and white terry cloth towel.

Spring Cleaning Series - Kitchen Cleaning

 

Featured Products

Tile & Grout Care Kit

Sue's Helpful Hints By SCI's Tech Support Specialist

Check out Sue's Helpful Hints section where she shares with you her expert advice, favorite products, tips and reccommendations.

Read Sue's Hints